ENIENT EC0102 Contact Cleaner is a solvent-based cleaner. It is mild, environmental protection, high efficiency. It is wildly used in a variety of precision instruments and mechanical equipment. It evaporates quickly, leaves no residue, is non-flammable and can be used under electrified conditions.
DIRECTIONS
Strong applicability. Safe to metal and most plactic, non-corrosive.
Fast cleaning. Has strong dissolving ability, fast evaporation without residue.
Low Flash Point. Significantly reduces the risk of fire caused by incidental contact with live electrical equipment, increasing user safety.
APPLICATION
Recommended for the effective cleaning of program-controlled switches, numerical control equipment, electronic components, computers, home appliances, automotive circuits, communications materials, instruments, optical devices and other precision electronic equipment for live cleaning or shutdown cleaning. Spray washing, cleaning, immersion ultrasound can be used.
[HANDLING PROCEDURES]Use adequate ventilation. When the environment humidity is high or the equipment surface is wet, please power off. Avoid eye and skin contact. Do not heat material. For product use instructions, please see the product label.
[STORAGE PROCEDURES] Store in a cool dry area out of direct sunlight. Keep container closed and store away from water or moisture. Store away from oxidizing materials. Do not expose to temperature extremes as container may rupture.
OPERATION
Spray washing, cleaning, immersion ultrasound can be used.
Wash for 5 to 10 seconds, then let dry.
ATTENTION
Operation area should be well-ventilated. Wear filtering equipment in confined space.
Avoid contact with skin and eyes during operation. Flush with plenty of warm water or normal saline if If accidentally splashed into the eye.
Product should be stored below 40℃.
Do not burn the abandoned empty cans.
All disposal activities must comply with state, provincial and local regulations.
