CleanersPruduct Catalog
Search / EC /

EC0106 Paint Remover

ENIENT EC0106 Paint Remover for Plastic can remove paint quickly without corrosion. It is especially suitable for plastic products, which can quickly peel off most of the organic paint on the plastic surface. It is suitable for polyester acrylic acid, alkyd, silicone, polyurethane, spraying plastic, UV adhesive and other resin paints.
 
APPLICATION
• Recommended for paint removal of ABS, PC, PE and other plastic substrate , widely used in mobile phones, digital cameras, notebook computer shell, car shell.
 
[HANDLING PROCEDURES] Use adequate ventilation. Keep away from open flames/sparks/heat/hot surfaces. Do not smoke when operating. Prohibit cutting, welding, drilling/grinding container or putting it near any ignition point. When transfer material, put it on earth. Avoid eye and skin contact. Do not heat material. For product use instructions, please see the product label. 
 
[STORAGE PROCEDURES] Store in a cool dry area out of direct sunlight. Keep container closed and store away from water or moisture. Store away from oxidizing materials. Do not expose to temperature extremes as container may rupture.
 
OPERATION
•The workpiece can be soaked into or brushed with the cleaner. When soaking, the workpiece should immerse into a paint groove for 10~30 minutes, after the paint is removed, take the workpiece out and wash clean with water. When brushing, brush with the cleaner on the surface for 20~30 minutes, wash clean with water after the paint layer off.
 
ATTENTION
•Operation area should be well-ventilated. Wear filtering equipment in confined space.
•Avoid contact with skin and eyes during operation. Flush with plenty of warm water or normal saline if If accidentally splashed into the eye.
•Product should be stored below 50℃.
•Do not burn the abandoned empty cans.
•All disposal activities must comply with state, provincial and local regulations.