CleanersPruduct Catalog
Search / EC /

EC0107 Carbon Cleaner Water-based Cleaner

ENIENT EC0107 Carbon Cleaner Water-based Cleaner is recommended used for cleaning the special carbon deposition and dense deposition in high pressure and high temperature on the surface of oil separator and oil separating disk of oil-fired generating system.
• It is recommended for cleaning carbon deposition of separating disk, oil separator, stainless steel mirror, car engine heads, marine engine, locomotive head power generating parts.
[HANDLING PROCEDURES] Use adequate ventilation. Keep away from open flames/sparks/heat/hot surfaces. Do not smoke when operating. Prohibit cutting, welding, drilling/grinding container or putting it near any ignition point. When transfer material, put it earthed. Avoid eye and skin contact. Do not heat material. For product use instructions, please see the product label. 
[STORAGE PROCEDURES] Store in a cool dry area out of direct sunlight. Keep container closed and store away from water or moisture. Store away from oxidizing materials. Do not expose to temperature extremes as container may rupture.
•Dilute the cleaner with 3-5 times of water, then immerse the work pieces into the solvent, pay attention to keep a certain distance between the work pieces. Take out the work parts after 30-60 minutes and wash clean with water.
•Operation area should be well-ventilated. Wear filtering equipment in confined space.
•Avoid contact with skin and eyes during operation. Flush with plenty of warm water or normal saline if accidentally splashed into the eye.
•Product should be stored below 40℃.
•Do not burn the abandoned empty cans.
•All disposal activities must comply with state, provincial and local regulations.