ENIENT EC0116 Industrial Strength Cleaner is able to clean heavy oil, remove carbonized materials produced by calcination. It can also be used to clean corrosion on metal products.
DIRECTIONS
Strong applicability: safe to metal, non-corrosive.
Widely used: has strong dissolution ability, can remove oil, carbon, asphalt and other dirt.
Strong permeability: dirt in small parts can also be dissolved and removed.
APPLICATION
Used for removing heavy oil stains, carbon deposits and corrosion on molds, motors and mechanical parts.
[HANDLING PROCEDURES]Use adequate ventilation. Keep away from open flames/sparks/heat/hot surfaces. Do not smoke when operating.Prohibit cutting,welding,drilling/grinding container or putting it near any ignition point. When transfer material, put it on earth. Avoid eye and skin contact. Do not heat material. For product use instructions, please see the product label.
[STORAGE PROCEDURES] Store in a cool dry area out of direct sunlight. Keep container closed and store away from water or moisture. Store away from oxidizing materials. Do not expose to temperature extremes as container may rupture.
OPERATION
· Soak the cleaning product into the cleaning solution.
· Wash for 3 to 8 minutes, then air dry or stove.
· The cleaning solution can be diluted with low mineral water.
ATTENTION
· Operation area should be well-ventilated. Wear filtering equipment in confined space.
· Avoid contact with skin and eyes during operation. Flush with plenty of warm water or normal saline if If accidentally splashed into the eye.
· Product should be stored in cool, dry, well ventilated place.
· Do not burn the abandoned empty cans.
· All disposal activities must comply with state, provincial and local regulations.
