Adhesives and sealantsPruduct Catalog
Search / EJ /

ENIENT EG1012 WHITE HDPE acrylic structure adhesive

ENIENT EG1012 WHITE HDPE acrylic structure adhesive is widely used, suitable for the solid bonding of a variety of materials without bottom coating, and has the characteristics of high shear strength, high stripping strength, no solvent, and the mixing ratio of 10:1.

PACKAGING

45ml
490ml.

Performance of Cured Materials



APPLICATION
· Fixation, sealing and structural bonding of the low surface energy substrate.


PERFORMANCE
 
· Strong bonding: specialized for the mutual bonding of polyolefin (PP, PE, LDPE, HDPE, etc.), and low surface energy substrate (PTFE, PMMA, nylon, TPO, PU, etc.), and the bonding of low surface energy materials to other common materials such as plastics, metal, composite materials, rubber and other common materials.
· Fast curing: The initial curing speed is fast, without long-time fixation, which is conducive to improving work efficiency.
· Special formula: Especially suitable for difficult sticky plastic products, without surface treatment.
· Safety and environmental protection:  low smell, no corrosion of the substrate, environmental protection and reliable.


PEOPERTIES

Surface A: Amber color B: White
Smell Acrylic acid odor
Viscosity (mPa · s) A:17000-30000
B:35000-55000
Operation time (25℃) 3min
Full curing time (25℃) 8-24min
Density (g/cm3) 1.05±0.2
Use ratio (volume ratio) 10:1
After curing
Hardness (SHORE D) 55
Tensile Strength (Mpa) ≥35
Voltage resistance (kv / mm) 24
Sheet resistance ohm 1.2×1014
Volume resistance of ohm-cm 1×1014
Dielectric constant 4.2
Curing shrinkage rate 0.12%
working temperature (℃) -30~100


Shear strength (psi) of 23℃ for 48h
 

HDPE 1,100 PP 1,050 ABS 1,550
PVC 2,000 PMMA 950 copper 2,800
aluminium 2,800        



ENIENT EG1012 WHITE ADHESIVE SEALANT

Disclaimer of Warranties: This information is accurate according to the test of ENIENT. However, due to different environment and conditions of actual use of the product, the result is inevitably different. All products should be tested for suitability on a particular application prior to actual use. ENIENT CHEM CO.,LTD makes no express or implies representations or warranties of description, data and information of reports/specifications of related products.