Coatings and paintsPruduct Catalog
Search / EP /

EG0202 Transparent protective coating silicone

ENIENT EG0202 Transparent protective coating silicone 
It has excellent waterproof, moistureproof, dustproof performance. It also has good performance of cold and heat resistance, aging resistance, rediation resistance, salt-fog resistance, ozone corrosion resistance, vibration resistance and good flexibility and adhesion.

· Suitable for bonding, fixing, sealing, moisture-proof and waterproof of electronic products.

ENIENT EG0202 COATING TRANSPARENT is a solvent-based, one-component acryliccoating adhesive, using benzene & xylene free formula It can be cured at room temperature orheating to promote thermal curing. It has stable performance under -65°C~135C.


Appearance Fluid
Viscosity(cps) 230~270
Colour Clear
Tack-free time (25℃.1mm) 5~15min
Specific gravity 0.86~0.9
Shear strength (MPa) 4~5
Tensile strength (MPa) 4~6
Peer strength (MPa) 5.5~7
Volume resistivity (Ω·cm) ≥1.0×1014
Dielectric strength (kV/mm) 20~25

·  Preproccess: the surface of the substrate shall be degrease, clean and dry, leave no dust and dirty.
·  Treatment: apply an appropriate amount of the product evenly on the surface to be covered. You can choose spraying, flow coating, infiltration, brush coating and other processes.
·  Curing: expose the covered work-piece to air for curing.