ENIENT EG0509CTransparent protective coating silicone It has excellent waterproof, moistureproof, dustproof performance. It also has good performance of cold and heat resistance, aging resistance, rediation resistance, salt-fog resistance, ozone corrosion resistance, vibration resistance and good flexibility and adhesion.
APPLICATION · Suitable for bonding, fixing, sealing, moisture-proof and waterproof of electronic products.
PERFORMANCE ENIENT EG0202L COATING TRANSPARENT is a solvent-based, one-component acryliccoating adhesive, using benzene & xylene free formula It can be cured at room temperature orheating to promote thermal curing. It has stable performance under -60°C~200C.
PEOPERTIES
Appearance
Fluid
Viscosity(cps)
6000±500
Colour
Clear
Tack-free time (25℃.1mm)
5~15min
Specific gravity
0.85~0.95
Hardness (Shore A)
20
Tensile strength (MPa)
2.2
Elongation (%)
350
Volume resistivity (Ω·cm)
≥5.0×1014
Work temperature
-60~200℃
INSTRUCTIONS · Preproccess: the surface of the substrate shall be degrease, clean and dry, leave no dust and dirty. · Treatment: apply an appropriate amount of the product evenly on the surface to be covered. You can choose spraying, flow coating, infiltration, brush coating and other processes. · Curing: expose the covered work-piece to air for curing.
