CleanersPruduct Catalog
Search / EC /

EC0112 Paint Remover Strong for Metal

ENIENT EC0112 Paint Remover Strong for Metal, can remove paint quickly and high efficiency. It is able to remove most all kind of painting within minutes, including epoxy resin and pitch. 
• It is recommended for paint remove of large steel structure, oil pipeline, gas pipeline, oil storage tank,  gas storage tank, etc.
[HANDLING PROCEDURES] Use adequate ventilation. Keep away from open flames/sparks/heat/hot surfaces. Do not smoke when operating. Prohibit cutting, welding, drilling/grinding container or putting it near any ignition point. When transfer material, put it earthed. Avoid eye and skin contact. Do not heat material. For product use instructions, please see the product label. 
[STORAGE PROCEDURES] Store in a cool dry area out of direct sunlight. Keep container closed and store away from water or moisture. Store away from oxidizing materials. Do not expose to temperature extremes as container may rupture.
•The work piece can be soaked into or brushed with the cleaner. When soaking, the work piece should immerse into a paint groove for 10~30 minutes, after the paint is removed, take the work piece out and wash clean with water. When brushing, brush with the cleaner on the surface for 20~30 minutes, wash clean with water after the paint layer off. For thick film products can be repeatedly coated.
•Operation area should be well-ventilated. Wear filtering equipment in confined space.
•Avoid contact with skin and eyes during operation. Flush with plenty of warm water or normal saline if If accidentally splashed into the eye.
•Product should be stored below 40℃.
•Do not burn the abandoned empty cans.
•All disposal activities must comply with state, provincial and local regulations.