Coatings and paintsPruduct Catalog
Search / EP /

EP30 ZINC PHOSPHATE PRIMER


EP30 ZINC PHOSPHATE PRIMER is a single pack non toxic metal primer. For general use on steel and iron surfaces where an anti-corrosive priming system is required. Because Zinc Phosphate is non toxic, it is well suited as a shop primer and presents little hazard when sprayed. This is especially important where subsequent welding of steelwork or fabrication is necessary as fumes given off are non-toxic.

 

 

SURFACE PREPARATION

Steel should be free from mill scale, rust or grease before painting. Blasting or
chemical etching is preferred. If this is not possible flame cleaning or extensive
wirebrushing is necessary.

 

 

PHYSICAL PROPERTIES

 

Colour/Texture :Red and Grey/Satin Finish.

Volume Solids :32%.

Product Density :1.26kg/litre.

Drying Time @ 25°C :Tack Free - 1 hour.

Recoat Time :2-3 hours.

Flashpoint :15°C.