Pruduct Catalog
Search / EC / EJ / EL / EP / ET / EY /

EJ0210 Epoxy Adhesive EPS® SERIES

EPS® series Part Number EJ0120 Epoxy Adhesive is 2 part epoxy for bonding , Potting & Rigidizing

EJ0222 Structural Adhesive EPS® SERIES

EPS® series Part Number EJ0222 Epoxy Adhesive is 1 part epoxy for bonding , Potting & Rigidizing

EJ0223 Structural Adhesive EPS® SERIES

EPS® series Part Number EJ0223 Epoxy Adhesive is 1 part epoxy for bonding , Potting & Rigidizing

EJ0224 Structural Adhesive EPS® SERIES

EPS® series Part Number EJ0224 Epoxy Adhesive is 1 part epoxy for bonding , Potting & Rigidizing

EP80 ZINC RICH COLD GALVANISED

EP80 ZINC RICH COLD GALVANISED is single pack zinc rich anti-corrosive primer designed to provide a high performance coating for ferrous metals Thin coats may be used as a shop prime, but heavier film thicknesses are recommended for longer term exposure

EP90 METAL PRIMER

EP90 METAL PRIMER is an Alkyd based shop primer It is designed as an interim holding primer and is not intended for use on long term exposed steel It has been formulated as a budget product for use on steel surfaces in general engineering shops

EP30 ZINC PHOSPHATE PRIMER

EP30 ZINC PHOSPHATE PRIMER is a single pack non toxic metal primer For general use on steel and iron surfaces where an anti-corrosive priming system is required

EP40 MACHINE PRIMER

EP40 MACHINE PRIMER is a single pack non toxic machine primer for use on new timber to provide a factory applied priming system Specifically formulated to provide a product with quick positive drying characteristics

EP50 INSULATING VARNISH

EP50 INSULATING VARNISH can be applied by brushing, pouring and all customary methods of impregnation i e dipping, VPI etc

EP60 Epoxy Anti-Corrosive Paint

EP60 Epoxy Anti-Corrosive Paint is Solvent-based two pack rust preventive paint which has excellent adhesion to metal

EG1102 One-component Epoxy Structural Adhesive

ENIENT EG1102 is one-component epoxy structural adhesive with high thixotropy and high viscosity, which has no vertical flow during curing